In standard configuration the Aavik U-150 amplifier have three line inputs. You have the option of adding a DAC section (PCM-DSD) and/or a MC-phono stage to the mix.

The Aavik U-150 includes a powerful 2x300W output section, making it a full featured High-End Audio system all in one box.

The Aavik 150 series is developed on all the experiences gained by the development and production of the highly praised Aavik 300 series and as thus, it carries most of the Sonic DNA from its famous larger siblings.

The sleek and sporty exterior design of both models gives you very simple and intuitive controls and a clear and easy to see dot-matrix display - everything straight forward to operate.


In the section below you can see the specifications for Aavik U-150 amplifier. Should you have any additional questions, then you are always welcome to contact us.

Aavik U-150 specifications
  • 2 x 300W 8 ohm, 2 x 600W 4 ohm
  • Distortion (THD+N): <0.006% (1-100W, 1kHz, 8 ohm)
  • IMD: <0.002% (1-100W, 4 ohm)
  • TIM: <0.008% (1-100W, 4 ohm)
  • Floating RCA input (1 set)
  • Load resistance adjustable from 50 ohm to 10 kohm
  • Frequency response +/-0.5dB (20Hz-20kHz)
  • Noise -90dB re 2V out
  • Distortion <0.02% (20Hz-20kHz)
  • RIAA correction curve
  • Gain: 60dB (adjustable to 70 dB in 5 x 2 dB steps)
  • 3 inputs
  • Input impedance: 10kOhm
  • Gain adjustable in 5 2dB steps
  • 2 RCA S/P-DIF inputs (32-192kHz, 24 bits)
  • 2 TOSLINK S/P-DIF inputs (32-96kHz, 24 bits)
  • USB galvanically isolated, UAC2, asynchronous 
    (PCM 32-196kHz, 24 bits, DSD64 and DSD128)
  Volume control:
  • 80 1dB steps
  Power consumption:
  • Standby: <0.5W
  • Idle: <50W
  • 88 x 440 x 370 mm
  •  15,0 kg